Cyrus IMAP Server: Overview and Concepts
This document has not been updated for Cyrus IMAP 2.0.
This document gives an overview of the Cyrus IMAP server. The
Cyrus IMAP (Internet Message Access Protocol) server provides
access to personal mail and system-wide bulletin boards through
the IMAP protocol. The Cyrus IMAP server is a scaleable
enterprise mail system designed for use from small to
large enterprise environments using
A full Cyrus IMAP implementation allows a seamless mail and
bulletin board environment to be set up across
multiple servers. It differs from other IMAP server
implementations in that it is run on "sealed" servers,
where users are not normally permitted to log in. The mailbox
database is stored in parts of the filesystem that are private to the
Cyrus IMAP system. All user access to mail is through software
using the IMAP, POP3, or KPOP protocols.
The private mailbox database design gives the server large advantages
in efficiency, scalability, and administratability. Multiple
concurrent read/write connections to the same mailbox are permitted.
The server supports access control lists on mailboxes and storage
quotas on mailbox hierarchies.
This document is organized into the following areas:
The Cyrus IMAP server presents mailboxes using the netnews
namespace convention. Mailbox names are case-sensitive. A mailbox
name may not start or end with a "." character, nor may it contain two
"." characters in a row.
In the initial implementation, non-ASCII characters, shell
metacharacters, and "/" are not permitted in mailbox names. Later
versions of the server may make the set of permissible characters
configurable at each site.
All personal mailboxes for user "bovik" begin with the
string "user.bovik.". For example, if user "bovik"
had a personal "work" mailbox, it would be called
"user.bovik.work". To user "bovik", however, the
prefix "user.bovik." normally appears as "INBOX.".
The mailbox "user.bovik.work" would therefore appear as
"INBOX.work". If the access control list
of the mailbox permitted other users to see that mailbox, it would
appear to them as "user.bovik.work".
The mailbox "user.bovik" is where the user
"bovik" normally receives new mail, and normally appears to
user "bovik" as "INBOX". The mailbox
"user.bovik" is referred to in this document as user
Administrators create and delete users by creating and deleting the
users' INBOX. If a user has an INBOX, then they are
allowed to subscribe to mailboxes. Only users without dots in their
userid are permitted to have an INBOX. (A user with a dot in
their userid would be able to login but would
not be able to receive mail.)
When an administrator deletes a user's INBOX, all of the
user's personal mailboxes are deleted as well.
With the one notable exception of INBOX, all mailbox names are
system-wide--they refer to the same mailbox regardless of the user.
Access control lists determine which users can
access or see which mailboxes.
In contexts which permit relative mailbox names, the mailbox namespace
works as follows:
Thus, if you are
working with folder names and the top of the
hierarchy is named "cmu.", the name "comp.infosystems.www"
resolves to "comp.infosystems.www" and the name
".comp.infosystems.www" resolves to
Access to each mailbox is controlled by each mailbox's access control list.
Access Control Lists (ACLs) provide a powerful mechanism
for specifying the users or groups of users who have permission to
access the mailboxes.
- Names that do not start with "." are fully qualified.
- Names that start with "." are relative to the current context.
An ACL is a list of zero or more entries. Each entry has an identifier
and a set of rights. The identifier specifies the user or group of
users for which the entry applies. The set of rights is one or more
letters or digits, each letter or digit conferring a particular privilege.
The defined rights are:
You can combine access rights in different ways. For example:
- lookup - The user may see that the mailbox exists.
- read - The user may read the mailbox.
The user may select the mailbox, fetch data, perform searches,
and copy messages from the mailbox.
- seen - Keep per-user seen state.
The "Seen" and "Recent" flags are preserved for the user.
- write - The user may modify flags and keywords other than
"Seen" and "Deleted" (which are controlled by other sets of rights).
- insert - The user may insert new messages into the mailbox.
- post - The user may send mail to the submission address for
the mailbox. This right differs from the "i" right in that
the delivery system inserts trace information into submitted
- create - The user may create new sub-mailboxes
of the mailbox, or delete or rename the current mailbox.
- delete - The user may store the "Deleted" flag,
and perform expunges.
- administer - The user may change the ACL on the mailbox.
- The user can read the mailbox.
- The user can read the mailbox, and can
post to it through the delivery system. Most delivery
systems do not provide authentication, so the "p" right usually has
meaning only for the "anonymous" user.
- The user can see the mailbox and can read it, but the server does
not preserve the "Seen" and "Recent" flags. This set of rights is
primarily useful for "anonymous IMAP."
- The user can read the mailbox and the server preserves the "Seen"
and "Recent" flags, but the mailbox is not visible to the user through
the various mailbox listing commands. The user must know the name of
the mailbox to be able to access it.
The identifier part of an ACL entry specifies the user or group
for which the entry applies. The meaning of an identifier
usually depends on the authorization mechanism being used.
With any authorization mechanism, two special identifiers are defined.
The identifier "anonymous" refers to the anonymous, or unauthenticated
user. The identifier "anyone" refers to all users, including the
The Cyrus IMAP server comes with two authorization mechanisms, one for
use with Unix "/etc/passwd" files, one for use with Kerberos.
- The user can read and append to the mailbox, either through
IMAP, or through the delivery system.
In the Unix authorization mechanism, identifiers are either a
userid listed in "/etc/passwd" or the string "group":
followed by a group listed in "/etc/group". Thus:
root Refers to the user root
group:staff Refers to the group staff
Using the Kerberos authorization mechanism, identifiers are of the
If ".instance" is omitted, it defaults to the null
string. If "@realm" is omitted, it defaults to
the local realm.
"Principal", "instance", or
"realm" may be replaced by the "*"
None of the above refer to the anonymous user.
- A "*" in an identifier represents all principals with the null instance
at the local realm.
- A "*.*@FOO.COM" in an identifier represents all principals
with all instances at FOO.COM.
- A "*.*@*" in an identifier represents all Kerberos-authenticated identities.
The file "/etc/krb.equiv" contains mappings between
Kerberos principals. The file contains zero or more lines, each
containing two fields. Any identity matching the first field of a
line is changed to the second identity during canonicalization. For
example, a line in "/etc/krb.equiv" of:
will cause the identity "bovik@REMOTE.COM" to be treated as if
it were the local identity "bovik".
A site may wish to write their own authorization mechanism, perhaps
to implement a local group mechanism.
Any of the above defined identifiers may be prefixed with a "-"
character. The associated rights are then removed from that
identifier. These are referred to as "negative rights".
To calculate the set of rights granted to a user, the server first
calculates the union of all of the rights granted to the user and to
all groups the user is a member of. The server then calculates and
removes the union of all the negative rights granted to the user and
to all groups the user is a member of.
For example, given the ACL:
The user "fred" will be granted the rights "lrswip"
and the anonymous user will be granted the rights "lrp".
Regardless of the ACL on a mailbox, users who are listed in the
"admins" configuration option in "/etc/imapd.conf" implicitly
have the "l" and "a" rights on all mailboxes. Users
also implicitly have the "l" and "a" rights on their
INBOX and all of their personal mailboxes.
When a mailbox is created, its ACL starts off with a copy of the ACL
of its closest parent mailbox. When a user is created, the ACL on the
user's INBOX starts off with a single entry granting all
rights to the user. When a non-user mailbox is created and does not
have a parent, its ACL is initialized to the value of the
"defaultacl" option in "/etc/imapd.conf"
This section discusses different types of logins that can be used
The Cyrus IMAP server uses the Cyrus SASL library for
authentication. This section describes how to configure SASL with use
with Cyrus imapd. Please consult the Cyrus SASL System
Administrator's Guide for more detailed, up-to-date information.
Regardless of the SASL mechanism used by an individual connection, the
server can support anonymous login. If the
"allowanonymouslogin" option in "/etc/imapd.conf" is
turned on, then the server will permit plaintext password logins using
the user "anonymous" and any password.
Additionally, the server will enable any SASL mechanisms that allow
The SASL library has several ways of verifying plaintext passwords
Plaintext passwords are passed either by the IMAP LOGIN
command or by the SASL PLAIN mechanism.
sasl_auto_transition automatically creates secrets for shared
secret authentication when given a password
The Kerberos SASL mechanism supports the KERBEROS_V4
authentication mechanism. The mechanism requires that a
srvtab file exist in the location given in the
"srvtab" configuration option. The srvtab file must
be readable by the Cyrus server and must contain a
service key, where <host> is the first
component of the server's host name and
<realm> is the server's Kerberos realm.
- Kerberos v4
Plaintext passwords are verified by obtaining a ticket for the
server's Kerberos identity, to protect against Kerberos server
The server will permit logins by identities in the local realm and
identities in the realms listed in the "loginrealms" option
The file "/etc/krb.equiv" contains mappings between
Kerberos principals. The file contains zero or more lines, each
containing two fields. Any identity matching the first field of a
line is permitted to log in as the identity in the second field.
If the "loginuseacl" configuration option is turned on,
than any Kerberos identity that is granted the "a" right on
the user's INBOX is permitted to log in as that user.
Quotas allow server administrators to limit resources used by
hierarchies of mailboxes on the server.
The Cyrus IMAP server supports quotas on storage, which is defined
as the number of bytes of the relevant RFC-822 messages, in kilobytes.
Each copy of a message is counted independently, even when the server
can conserve disk space use by making hard links to message files.
The additional disk space overhead used by mailbox index and cache
files is not charged against a quota.
Quotas are applied to quota roots, which can be at any level of the
mailbox hierarchy. Quota roots need not also be mailboxes.
Quotas on a quota root apply to the sum of the usage of any mailbox at
that level and any sub-mailboxes of that level that are not underneath
a quota root on a sub-hierarchy. This means that each mailbox is
limited by at most one quota root.
For example, if the mailboxes
exist and the quota roots
exist, then the quota root "user.bovik" applies to the
mailboxes "user.bovik" and "user.bovik.todo"; the
quota root "user.bovik.list" applies to the mailboxes
"user.bovik.list.info-cyrus"; and the quota root
"user.bovik.saved" applies to the mailbox
Quota roots are created automatically when they
are mentioned in the
"setquota" command. Quota roots may not be deleted through the
protocol, see Removing Quota Roots for
instructions on how to delete them.
Normally, in order for a message to be inserted into a mailbox, the
quota root for the mailbox must have enough unused storage so that
inserting the message will not cause the block quota to go over the limit.
Mail delivery is a special case. In order for a message to be
delivered to a mailbox, the quota root for the mailbox must not have
usage that is over the limit. If the usage is not over the limit,
then one message may be delivered regardless of its size. This puts
the mailbox's usage over the quota, causing a user to be informed of
the problem and permitting them to correct it. If delivery were not
permitted in this case, the user would have no practical way of
knowing that there was mail that could not be delivered.
If the usage is over the limit, then the mail delivery will fail with
a temporary error. This will cause the delivery system to re-attempt
delivery for a couple of days (permitting the user time to notice and
correct the problem) and then return the mail to the sender.
When a user selects a mailbox whose quota root has usage that is close
to or over the limit and the user has "d" rights on the mailbox, the
server will issue an alert notifying the user that usage is close to
or over the limit. The threshold of usage at which the server will
issue quota warnings is set by the "quotawarn" configuration option.
The server only issues warnings when the user has "d"
rights because only users with "d" rights are capable of
correcting the problem.
Quota roots are independent of partitions. A single
quota root can apply to mailboxes in different partitions.
The Cyrus IMAP server comes with two optional notification
mechanisms, for use with either the Zephyr notification service, or a
custom Unix sockets notification daemon.
If the server software is compiled with the Zephyr notification
mechanism, then the server sends a Zephyrgram to a user whenever mail
is delivered to one of that user's mailboxes. The Zephyrgram is sent
with a class of "MAIL" and an instance of the mailbox name.
If the server software is compiled with the custom Unix sockets
notification daemon mechanism, then the server creates a Unix socket
connection to /var/imap/socket/notify and passes the following
information (separated by newlines):
The contrib/notify_unix directory has two examples of Perl
daemons that implement simple notification. See the README
file located the the same directory for details.
Partitions allow administrators to store different mailboxes in
different parts of the Unix filesystem. This is intended to be used
to allow hierarchies of mailboxes to be spread across multiple disks.
When an administrator creates a new mailbox, the name of the partition
for the mailbox may be specified using an optional second argument to
the "create" command. Non-administrators are not permitted to
specify the partition of a mailbox. If the partition is not
specified, then the mailbox inherits the partition of its most
immediate parent mailbox. If the mailbox has no parent, it gets the
partition specified in the "defaultpartition" configuration
- User: The username that the email is being delivered to
- Mailbox: The folder that the email is being delivered to
- Message: The From, To, and Subject headers of the email.
The optional second argument to the "create" command can
usually be given only when using a specialized administrative client
such as cyradm.
An administrator may change the partition of a mailbox by using the
rename command with an optional third argument. When a third argument
to rename is given, the first and second arguments can be the
same--this changes the partition of a mailbox without changing its
name. If a third argument to rename is not given and the first
argument is not "INBOX", the partition of a mailbox does not change.
If a third argument to rename is not given and the first argument is
"INBOX", the newly created mailbox gets the same partition it would
get from the "create" command.
This section contains an overview of concepts related to exporting
news groups through the IMAP server.
The partition named "news" is reserved for netnews and cannot be used
for any other purpose.
The IMAP server can export netnews newsgroups as IMAP mailboxes. This
is done by creating a partition named "news" which points to the news
spool directory and arranging for the IMAP server's auxiliary
databases to be maintained. The server software includes programs for
integrating with the INN netnews server. The following information
assumes working knowledge of the INN netnews server.
The "collectnews" program takes as input a list of article file
path names relative to the news spool directory. It then adds those
messages to the auxiliary databases. If collectnews encounters a
newsgroup that does not have a corresponding IMAP
mailbox listed in the mailboxes file (described later), it adds it there.
The "collectnews" program is normally run from cron as
the cyrus user. It is given as input a news overview feed. Since
collectnews needs to write the auxiliary databases in the news spool
area, the cyrus user must be in the news group and the news group must
be able to write to the news spool area.
The "rmnews" program takes a list of article pathnames relative to the
news spool directory. It removes (expunges) any mention of those
messages from the auxiliary databases and unlinks the article files.
The "rmnews" program is used to remove both expired and canceled articles.
"Rmnews" takes the same input as the "fastrm"
program. It is normally run to clean up after expire by
invoking news.daily with the "delayrm" argument and
having RMPROC in expirerm changed from
"fastrm" to "rmnews".
Rmnews is also normally run from cron as the cyrus
user to remove canceled and superseded articles. It is given as input
a special cancel feed.
As "rmnews" is invoked at expire time by the news user and
must be able to write to the auxiliary databases, it must be installed with
set-uid to the cyrus user and set-gid to the news group.
The "syncnews" program takes as an argument the name of the
news active file. It
compares the list of IMAP news mailboxes with the news active file.
News mailboxes which are not listed in the active file are removed.
Newsgroups listed in the active file but not in the IMAP mailboxes
file have IMAP mailboxes created.
A newsgroup must have a status of ``y'', ``m'', or ``n'' to be
considered listed in the active file.
The "syncnews" program should be invoked by the
cyrus user at least daily from cron.
Integration with the Cyrus IMSP server, to allow transparent location
of mailboxes on multiple servers, is not completed as of version
The Cyrus IMAP server software comes with a compatibility POP3 server.
Due to limitations in the POP3 protocol, the server can only access a
user's INBOX and only one instance of a POP3 server may exist for any
one user at any time. While a POP3 server has a user's INBOX open,
expunge operations from any concurrent IMAP session will fail.
When Kerberos login authentication is being used, the POP3 server
uses the server identity
"pop.host@realm" instead of
"host" is the first component of the server's host
name and "realm" is the server's Kerberos realm.
When the POP3 server is invoked with the "-k" switch, the
server exports MIT's KPOP protocol instead of generic POP3.
The Cyrus IMAP server software sends log messages to the "local6"
syslog facility. The severity levels used are:
This section describes the various databases used by the Cyrus IMAP
server software and what can be done to recover from various
inconsistencies in these databases.
The largest database is the mailbox directories. Each
mailbox directory contains the following files:
- CRIT - Critical errors which probably require prompt administrator action
- ERR - I/O errors, including failure to update quota usage.
The syslog message includes the specific file and Unix error.
- WARNING - Protection mechanism failures, client inactivity
- NOTICE - Authentications, both successful and unsuccessful
- INFO - Mailbox openings, duplicate delivery suppression
The "reconstruct" program can be used to recover from
corruption in mailbox directories. If "reconstruct" can find
existing header and index files, it attempts to preserve any data in
them that is not derivable from the message files themselves. The
state "reconstruct" attempts to preserve includes the flag
names, flag state, and internal date. "Reconstruct"
derives all other information from the message files.
- message files
- There is one file per message, containing the
message in RFC 822 format. Lines in the message are separated by
CRLF, not just LF. The file name of each message is the message's
UID followed by a dot (.).
In netnews newsgroups, the message files instead follow the
format and naming conventions imposed by the netnews software.
- This file contains a magic number and variable-length
information about the mailbox itself.
- This file contains fixed-length information about the
mailbox itself and each message in the mailbox.
- This file contans variable-length information about
each message in the mailbox.
- This file contains variable-length state information about
each reader of the mailbox who has "s" permissions.
An administrator may recover from a damaged disk by restoring message
files from a backup and then running reconstruct to regenerate what it
can of the other files.
The "reconstruct" program does not adjust the quota usage
recorded in any quota root files. After running reconstruct, it is
advisable to run "quota -f" (described below) in order to fix
the quota root files.
The mailboxes file in the configuration directory is the most critical
file in the entire Cyrus IMAP system. It contains a sorted list of
each mailbox on the server, along with the mailboxes quota root and
To reconstruct a corrupted mailboxes file, run the "reconstruct
-m" command. The "reconstruct" program, when invoked
with the "-m" switch, scavenges and corrects whatever data it
can find in the existing mailboxes file. It then scans all partitions
listed in the imapd.conf file for additional mailbox directories to
put in the mailboxes file.
The cyrus.header file in each mailbox directory stores a
redundant copy of the mailbox ACL, to be used as a backup when
rebuilding the mailboxes file.
The subdirectory "quota" of the configuration directory (specified in
the "configdirectory" configuration option) contains one file per
quota root, with the file name being the name of the quota root. These
files store the quota usage and limits of each of the quota roots.
The "quota" program, when invoked with the "-f"
switch, recalculates the quota root of each mailbox and the quota
usage of each quota root.
To remove a quota root, remove the quota root's file. Then run
"quota -f" to make the quota files consistent again.
The subdirectory "user" of the configuration directory contains user
subscriptions. There is one file per user, with a filename of the
userid followed by ".sub". Each file contains a sorted list of
There is no program to recover from damaged subscription files. A
site may recover from lost subscription files by restoring from backups.
Many objects in the configuration directory are discussed in
the Database Recovery section. This section documents two
other directories that reside in the configuration directory.
The subdirectory "log" under the configuration directory permits
administrators to keep protocol telemetry logs on a per-user basis.
If a subdirectory of "log" exists with the same name as a user, the
IMAP and POP3 servers will keep a telemetry log of protocol sessions
authenticating as that user. The telemetry log is stored in the
subdirectory with a filename of the server process-id and starts with
the first command following authentication.
The subdirectory "proc" under the configuration directory
contains one file per active server process. The file name is the ASCII
representation of the process id and the file contains the following
The file may contain arbitrary characters after the first newline
- hostname of the client
- login name of the user, if logged in
- selected mailbox, if a mailbox is selected
The "proc" subdirectory is normally be cleaned out on
This section refers to version 2.0 of the Cyrus IMAP server.
Local Mail Transfer Protocol
LMTP, the Local Mail Transfer Protocol, is a variant of SMTP design
for transferring mail to the final message store. The Cyrus server
implements LMTP via the lmtpd daemon. LMTP can either be
used over a network via TCP or local via a UNIX domain socket.
Many MTAs (such as the latest versions of Sendmail or Postfix) can deliver "local" mail over a
network. This is an easy optimization so that the IMAP server doesn't
need to maintain a queue of messages or run an MTA.
Authenticated final delivery is also supported in the form of LMTP
AUTH. If the final delivery isn't authenticated, it is treated (for
the purposes of checking ACLs) as if the "anonymous" user is
Single Instance Store
If a delivery attempt mentions several recipients (only possible if
the MTA is speaking LMTP to lmtpd), the server attempts to
store as few copies of a message as possible. It will store one copy
of the message per partition, and create hard links for all other
recipients of the message.
Single instance store can be turned off by using the
"singleinstancestore" flag in the configuration file.
Duplicate Delivery Suppression
Sieve, a Mail Filtering Language
Return to the Cyrus IMAP Server Home Page