version 3.6

DOLLOP -- Dollo and Polymorphism Parsimony Program

© Copyright 1986-2002 by the University of Washington. Written by Joseph Felsenstein. Permission is granted to copy this document provided that no fee is charged for it and that this copyright notice is not removed.

This program carries out the Dollo and polymorphism parsimony methods. The Dollo parsimony method was first suggested in print in verbal form by Le Quesne (1974) and was first well-specified by Farris (1977). The method is named after Louis Dollo since he was one of the first to assert that in evolution it is harder to gain a complex feature than to lose it. The algorithm explains the presence of the state 1 by allowing up to one forward change 0-->1 and as many reversions 1-->0 as are necessary to explain the pattern of states seen. The program attempts to minimize the number of 1-->0 reversions necessary.

The assumptions of this method are in effect:

  1. We know which state is the ancestral one (state 0).
  2. The characters are evolving independently.
  3. Different lineages evolve independently.
  4. The probability of a forward change (0-->1) is small over the evolutionary times involved.
  5. The probability of a reversion (1-->0) is also small, but still far larger than the probability of a forward change, so that many reversions are easier to envisage than even one extra forward change.
  6. Retention of polymorphism for both states (0 and 1) is highly improbable.
  7. The lengths of the segments of the true tree are not so unequal that two changes in a long segment are as probable as one in a short segment.

One problem can arise when using additive binary recoding to represent a multistate character as a series of two-state characters. Unlike the Camin-Sokal, Wagner, and Polymorphism methods, the Dollo method can reconstruct ancestral states which do not exist. An example is given in my 1979 paper. It will be necessary to check the output to make sure that this has not occurred.

The polymorphism parsimony method was first used by me, and the results published (without a clear specification of the method) by Inger (1967). The method was independently published by Farris (1978a) and by me (1979). The method assumes that we can explain the pattern of states by no more than one origination (0-->1) of state 1, followed by retention of polymorphism along as many segments of the tree as are necessary, followed by loss of state 0 or of state 1 where necessary. The program tries to minimize the total number of polymorphic characters, where each polymorphism is counted once for each segment of the tree in which it is retained.

The assumptions of the polymorphism parsimony method are in effect:

  1. The ancestral state (state 0) is known in each character.
  2. The characters are evolving independently of each other.
  3. Different lineages are evolving independently.
  4. Forward change (0-->1) is highly improbable over the length of time involved in the evolution of the group.
  5. Retention of polymorphism is also improbable, but far more probable that forward change, so that we can more easily envisage much polymorhism than even one additional forward change.
  6. Once state 1 is reached, reoccurrence of state 0 is very improbable, much less probable than multiple retentions of polymorphism.
  7. The lengths of segments in the true tree are not so unequal that we can more easily envisage retention events occurring in both of two long segments than one retention in a short segment.

That these are the assumptions of parsimony methods has been documented in a series of papers of mine: (1973a, 1978b, 1979, 1981b, 1983b, 1988b). For an opposing view arguing that the parsimony methods make no substantive assumptions such as these, see the papers by Farris (1983) and Sober (1983a, 1983b), but also read the exchange between Felsenstein and Sober (1986).

The input format is the standard one, with "?", "P", "B" states allowed. The options are selected using a menu:


Dollo and polymorphism parsimony algorithm, version 3.6a3

Settings for this run:
  U                 Search for best tree?  Yes
  P                     Parsimony method?  Dollo
  J     Randomize input order of species?  No. Use input order
  T              Use Threshold parsimony?  No, use ordinary parsimony
  A   Use ancestral states in input file?  No
  W                       Sites weighted?  No
  M           Analyze multiple data sets?  No
  0   Terminal type (IBM PC, ANSI, none)?  (none)
  1    Print out the data at start of run  No
  2  Print indications of progress of run  Yes
  3                        Print out tree  Yes
  4     Print out steps in each character  No
  5     Print states at all nodes of tree  No
  6       Write out trees onto tree file?  Yes

Are these settings correct? (type Y or the letter for one to change)

The options U, J, T, A, and M are the usual User Tree, Jumble, Ancestral States, and Multiple Data Sets options, described either in the main documentation file or in the Discrete Characters Programs documentation file. The A (Ancestral States) option allows implementation of the unordered Dollo parsimony and unordered polymorphism parsimony methods which I have described elsewhere (1984b). When the A option is used the ancestor is not to be counted as one of the species. The O (outgroup) option is not available since the tree produced is already rooted. Since the Dollo and polymorphism methods produce a rooted tree, the user-defined trees required by the U option have two-way forks at each level.

The P (Parsimony Method) option is the one that toggles between polymorphism parsimony and Dollo parsimony. The program defaults to Dollo parsimony.

The T (Threshold) option has already been described in the Discrete Characters programs documentation file. Setting T at or below 1.0 but above 0 causes the criterion to become compatibility rather than polymorphism parsimony, although there is no advantage to using this program instead of MIX to do a compatibility method. Setting the threshold value higher brings about an intermediate between the Dollo or polymorphism parsimony methods and the compatibility method, so that there is some rationale for doing that. Since the Dollo and polymorphism methods produces a rooted tree, the user-defined trees required by the U option have two-way forks at each level.

Using a threshold value of 1.0 or lower, but above 0, one can obtain a rooted (or, if the A option is used with ancestral states of "?", unrooted) compatibility criterion, but there is no particular advantage to using this program for that instead of MIX. Higher threshold values are of course meaningful and provide intermediates between Dollo and compatibility methods.

The X (Mixed parsimony methods) option is not available in this program. The Factors option is also not available in this program, as it would have no effect on the result even if that information were provided in the input file.

Output is standard: a list of equally parsimonious trees, and, if the user selects menu option 4, a table of the numbers of reversions or retentions of polymorphism necessary in each character. If any of the ancestral states has been specified to be unknown, a table of reconstructed ancestral states is also provided. When reconstructing the placement of forward changes and reversions under the Dollo method, keep in mind that each polymorphic state in the input data will require one "last minute" reversion. This is included in the tabulated counts. Thus if we have both states 0 and 1 at a tip of the tree the program will assume that the lineage had state 1 up to the last minute, and then state 0 arose in that population by reversion, without loss of state 1.

If the user selects menu option 5, a table is printed out after each tree, showing for each branch whether there are known to be changes in the branch, and what the states are inferred to have been at the top end of the branch. If the inferred state is a "?" there may be multiple equally-parsimonious assignments of states; the user must work these out for themselves by hand.

If the A option is used, then the program will infer, for any character whose ancestral state is unknown ("?") whether the ancestral state 0 or 1 will give the best tree. If these are tied, then it may not be possible for the program to infer the state in the internal nodes, and these will all be printed as ".". If this has happened and you want to know more about the states at the internal nodes, you will find helpful to use DOLMOVE to display the tree and examine its interior states, as the algorithm in DOLMOVE shows all that can be known in this case about the interior states, including where there is and is not amibiguity. The algorithm in DOLLOP gives up more easily on displaying these states.

If the U (User Tree) option is used and more than one tree is supplied, the program also performs a statistical test of each of these trees against the best tree. This test, which is a version of the test proposed by Alan Templeton (1983) and evaluated in a test case by me (1985a). It is closely parallel to a test using log likelihood differences invented by Kishino and Hasegawa (1989), and uses the mean and variance of step differences between trees, taken across characters. If the mean is more than 1.96 standard deviations different then the trees are declared significantly different. The program prints out a table of the steps for each tree, the differences of each from the highest one, the variance of that quantity as determined by the step differences at individual characters, and a conclusion as to whether that tree is or is not significantly worse than the best one. It is important to understand that the test assumes that all the binary characters are evolving independently, which is unlikely to be true for many suites of morphological characters.

If there are more than two trees, the test done is an extension of the KHT test, due to Shimodaira and Hasegawa (1999). They pointed out that a correction for the number of trees was necessary, and they introduced a resampling method to make this correction. In the version used here the variances and covariances of the sums of steps across characters are computed for all pairs of trees. To test whether the difference between each tree and the best one is larger than could have been expected if they all had the same expected number of steps, numbers of steps for all trees are sampled with these covariances and equal means (Shimodaira and Hasegawa's "least favorable hypothesis"), and a P value is computed from the fraction of times the difference between the tree's value and the lowest number of steps exceeds that actually observed. Note that this sampling needs random numbers, and so the program will prompt the user for a random number seed if one has not already been supplied. With the two-tree KHT test no random numbers are used.

In either the KHT or the SH test the program prints out a table of the number of steps for each tree, the differences of each from the lowest one, the variance of that quantity as determined by the differences of the numbers of steps at individual characters, and a conclusion as to whether that tree is or is not significantly worse than the best one.

At the beginning of the program is the constant "maxtrees", the maximum number of trees which the program will store for output.

The algorithm is a fairly simple adaptation of the one used in the program SOKAL, which was formerly in this package and has been superseded by MIX. It requires two passes through each tree to count the numbers of reversions.


TEST DATA SET

     5    6
Alpha     110110
Beta      110000
Gamma     100110
Delta     001001
Epsilon   001110


TEST SET OUTPUT (with all numerical options on)


Dollo and polymorphism parsimony algorithm, version 3.6a3

 5 species,   6  characters

Dollo parsimony method


Name         Characters
----         ----------

Alpha        11011 0
Beta         11000 0
Gamma        10011 0
Delta        00100 1
Epsilon      00111 0



One most parsimonious tree found:




  +-----------Delta     
--3  
  !  +--------Epsilon   
  +--4  
     !  +-----Gamma     
     +--2  
        !  +--Beta      
        +--1  
           +--Alpha     


requires a total of      3.000

 reversions in each character:
         0   1   2   3   4   5   6   7   8   9
     *-----------------------------------------
    0!       0   0   1   1   1   0            

From    To     Any Steps?    State at upper node
                             ( . means same as in the node below it on tree)

root      3         yes    ..1.. .
  3    Delta        yes    ..... 1
  3       4         yes    ...11 .
  4    Epsilon      no     ..... .
  4       2         yes    1.0.. .
  2    Gamma        no     ..... .
  2       1         yes    .1... .
  1    Beta         yes    ...00 .
  1    Alpha        no     ..... .